Yes, No, and maybe!

Yes. This website and the project pages are still active. No, I don’t have an update on the VFO upgrade. Maybe this Summer, when I have some more time, I’ll get to posting the latest version I have been working on.

In the meantime… THANK YOU VERY MUCH to all who visit my site, try one of my projects, and send me a note about. I appreciate it.

Rich
AD7C

3 thoughts on “Yes, No, and maybe!

  1. Wonderful to find your website still operating and the DDS project still active.
    Thank you for all the work you have invested. I would like to build this VFO as part of getting active on-air again .. after many years not operating.
    Tony Burns, ZL1AHJ, Auckland, New Zealand.

  2. Thank you for providing me with a starting point for my homebrew signal generator.

    I have modified the code to allow me to use a VFD connected via I2C, which worked eventually ( I am a bit of a beginner at coding, despite having worked in It for over 40 years).

    Now alI I need to do is take off the band and licence class warnings, and add a 1 MHz step option. Oh and perhaps a low pass filter.

    Eventually I will upgrade my DDS chip to a 9951 for a cleaner output.
    Like all these things, 1 step at a time.

    Nigel
    G3YSW

  3. Hi Rich,
    congratulations for your project, is very simple and operational. I Added some lines before reading the eeprom in your code for provide a initialization of eeprom, in order to burn one time without change in variables, I wait can help you, 73!

    // Load the stored frequency
    // Initialising eeprom…
    if (EEPROM.read(9) != 1){
    EEPROM.write(0,7); EEPROM.write(1,2); EEPROM.write(2,0);
    EEPROM.write(3,0); EEPROM.write(4,0); EEPROM.write(5,0);
    EEPROM.write(6,0); EEPROM.write(9,1); // Done!
    }

    if (ForceFreq == 0) {
    freq = String(EEPROM.read(0))+String(EEPROM.read(1))+String(EEPROM.read(2))+String(EEPROM.read(3))+String(EEPROM.read(4))+String(EEPROM.read(5))+String(EEPROM.read(6));
    rx = freq.toInt();
    }
    }

    Best Regards,

    Leonardo PU3LND

Leave a Reply to Tony Burns Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>